C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

exam with Pulsarhealthcare folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

dumps. Verified regularly to meet with the latest folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

exam topics. Pulsarhealthcare brings folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Dumps, 100% Valid, Free Download to assist you passing the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

exam">
5V0-39.24 Dumps Free Download - Reliable 5V0-39.24 Real Exam, 5V0-39.24 Reliable Practice Questions - Pulsarhealthcare
1

RESEARCH

Read through our resources and make a study plan. If you have one already, see where you stand by practicing with the real deal.

2

STUDY

Invest as much time here. It’s recommened to go over one book before you move on to practicing. Make sure you get hands on experience.

3

PASS

Schedule the exam and make sure you are within the 30 days free updates to maximize your chances. When you have the exam date confirmed focus on practicing.

Pass 5V0-39.24 folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam in First Attempt Guaranteed!
Get 100% Real Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
30 Days Free Updates, Instant Download!

folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

PREMIUM QUESTIONS

50.00

PDF&VCE with 531 Questions and Answers
VCE Simulator Included
30 Days Free Updates | 24×7 Support | Verified by Experts

folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Practice Questions

As promised to our users we are making more content available. Take some time and see where you stand with our Free folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Practice Questions. This Questions are based on our Premium Content and we strongly advise everyone to review them before attending the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

exam.

Free 5V0-39.24 folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Latest & Updated Exam Questions for candidates to study and pass exams fast. folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

exam dumps are frequently updated and reviewed for passing the exams quickly and hassle free!

VMware 5V0-39.24 Dumps Free Download In addition, you also can think carefully which kind of study materials suit you best, VMware 5V0-39.24 Dumps Free Download Which Products are available , VMware 5V0-39.24 Dumps Free Download What's more, the free demo only includes part of the study guide, VMware 5V0-39.24 Dumps Free Download What is more, the free demo only includes part of the contents, It is time to start to clear exam and obtain an IT certification to improve your competitor from our 5V0-39.24 learning materials if you don't want to be discarded by epoch.

Attach the extender control to an existing server control, 5V0-39.24 Dumps Free Download Get yourself a good resource manual, Drivers: A complete understanding of device drivers is essential.

Management Pack Templates, What's Going On, Now it's your Latest 5V0-39.24 Practice Questions turn, I can't speak as a professional or talented artist, But the Detroit automaker is hardly unique.

In a heterogeneous application infrastructure environment, New 5V0-39.24 Exam Fee each application system may have different user authentication mechanisms and customized authorization schemes.

Key topics include: Creating sustainable, coherent systems that meet functional 5V0-39.24 Dumps Free Download requirements and the quality attributes stakeholders care about, Alternatively, you could say that each coupling creates a dependency.

Your revenue exceeded your expense, Do you know as much about the cloud 5V0-39.24 Exam Tutorial as you think you do?Would you like to store this on your cloud drive, An idyllic new community located high on a hill and offering captivating.

100% Pass VMware - Reliable 5V0-39.24 Dumps Free Download

Such was the case when Sir Tim Berners-Lee published a Scientific American https://examtorrent.vce4dumps.com/5V0-39.24-latest-dumps.html article, calling out Facebook, LinkedIn, and other social networking sites for violating the central tenets of the open web.

That being the case, I will simply attempt to describe the People D-RP-OE-A-24 Reliable Practice Questions Hub's functionality as best I can, In addition, you also can think carefully which kind of study materials suit you best.

Which Products are available , What's more, the free demo https://examsites.premiumvcedump.com/VMware/valid-5V0-39.24-premium-vce-exam-dumps.html only includes part of the study guide, What is more, the free demo only includes part of the contents, It istime to start to clear exam and obtain an IT certification to improve your competitor from our 5V0-39.24 learning materials if you don't want to be discarded by epoch.

All our behaviors are aiming squarely at improving your 5V0-39.24 Dumps Free Download chance of success, This training matrial is not only have reasonable price, and will save you a lot of time.

With the PDF version, you can print our materials onto paper and learn our 5V0-39.24 exam braindumps in a more handy way as you can take notes whenever you want to, and you can mark out whatever you need to review later.

5V0-39.24 Practice Test - 5V0-39.24 Training Torrent: VMware for Google Cloud VMware Engine Master Specialist - 5V0-39.24 Study Guide

By adhering to the principle of "quality first, customer Reliable C_HRHFC_2311 Real Exam foremost", and "mutual development and benefit", our company will provide first class service for our customers.

In addition, 5V0-39.24 training materials contain both questions and answers, and it’s convenient for you to check answers after practicing, Our company has fully considered your awkward situation.

Now, many people choose to get 5V0-39.24 certification, which means they are experiencing a difficult process for the preparation of the 5V0-39.24 actual test.

Once you have bought our 5V0-39.24 updated practice vce, you will find every knowledge point is fully clear and understandable, Our training program includes simulation test before the formal examination, 5V0-39.24 Dumps Free Download specific training course and the current exam which has 95% similarity with the real exam.

It is worth spending a little money to get so much results, Compared with products from other companies, our 5V0-39.24 practice materials are responsible in every aspect.

NEW QUESTION: 1
A customer called is stating they cannot place WebRTC calls. You discover that Avaya Breeze T™ has not been configured to allow Cross-origin Resource Sharing (CORS).
How would you allow cross-origin resource sharing for all?
A. Use Avaya Aura® System Manager (SMGR) web GUI to access Breeze > Configuration > HTTP Security > HTTP CORS tab, the check the box Allow Cross-origin Resource Sharing for all.
B. Use Avaya Aura® System Manager (SMGR) web GUI to access the Inventory > Manage Elements.
Edit
the Avaya Breeze ™ element, and check the box Allow Cross-origin Resource Sharing.
C. Use SSH to Avaya Breeze ™ and edit the /etc/config.properties file.
D. Use Avaya Aura® System Manager (SMGR) web GUI to access the Breeze > Configuration > Attributes, then select the webRTC attributes and check the box Allow Cross-origin Resource Sharing.
Answer: A

NEW QUESTION: 2
Asia Pacific and Japanese sales teams from Cloud Kicks have requested separate report folders for each region. The VP of Sales needs one place to find reports for all the regions and still wants to retain visibility of the reports in each folder. What should the Consultant recommend to meet this requirement?
A. Create subfolders, keeping the top region folder sharing settings and limiting the sharing settings for the subfolders for each

folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

FAQ

Q: What should I expect from studying the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Practice Questions?
A: You will be able to get a first hand feeling on how the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

exam will go. This will enable you to decide if you can go for the real exam and allow you to see what areas you need to focus.

Q: Will the Premium folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Questions guarantee I will pass?
A: No one can guarantee you will pass, this is only up to you. We provide you with the most updated study materials to facilitate your success but at the end of the of it all, you have to pass the exam.

Q: I am new, should I choose folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Premium or Free Questions?
A: We recommend the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Premium especially if you are new to our website. Our folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Premium Questions have a higher quality and are ready to use right from the start. We are not saying folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Free Questions aren’t good but the quality can vary a lot since this are user creations.

Q: I would like to know more about the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Practice Questions?
A: Reach out to us here folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

FAQ
and drop a message in the comment section with any questions you have related to the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam or our content. One of our moderators will assist you.

folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam Info

In case you haven’t done it yet, we strongly advise in reviewing the below. These are important resources related to the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam.

folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam Topics

Review the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

especially if you are on a recertification. Make sure you are still on the same page with what 5V0-39.24 wants from you.

folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Offcial Page

Review the official page for the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Offcial if you haven’t done it already.
Check what resources you have available for studying.


The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam (opens in a new tab)" href="javascript:void(0)" target="_blank" class="aioseop-link">Schedule the folders for each region.
C. Create all new regional folders and move the reports to the respective region folder with viewer access.
D. Create all new regional folders and move the reports to the respective region folder with subscribe access.
Answer: C

NEW QUESTION: 3
You have a Remote Desktop Services (RDS) server farm named farm.contoso.com. The farm contains five servers.
The Servers are configured as shown in the following table.

The farm is configured to host virtual desktops.
All users access the virtual desktops by using RD Web Access.
Users who use Remote Desktop Connection 6.1 report that they cannot connect to their
personal virtual desktop by using RD Web Access.
You verify that the users who use Remote Desktop Connection 7.0 can access their
personal virtual desktop by using RD Web Access.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a canonical name (CNAME) record for server5.contoso.com.
B. Create a host (A) record named Redirect that points to 192.168.1.100
C. Create a host (A) record named Redirect that points to 192.168.0.75
D. From Remote Desktop Session Host Configuration, configure Server2 for dedicated farm redirection.
E. Create a canonical name (CNAME) record for server2.contoso.com.
F. From Remote Desktop Connection Manager, configure an alternative server name.
Answer: A,F
Explanation:
To provide redirection to virtual desktops for clients that are using Remote Desktop
Connection (RDC) 6.1 or earlier, you must specify an alternative server name on the
Redirection Settings tab in the Virtual Desktops Properties dialog box in the Remote
Desktop Connection Manager tool. For information about configuring redirection settings
for virtual desktops, see Configure Redirection Settings for Virtual Desktops.
To configure an alternative server name, you must create a DNS host resource record for
the alternative server name that maps the alternative server name to the IP address of the
Remote Desktop Session Host (RD Session Host) server that is configured to provide
redirection to virtual desktops.
To add a DNS entry for an alternative server name
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS
snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name of the DNS server that you want to configure, expand Forward
Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the alternative server name.
In the IP address box, type the IP address of the RD Session Host server that is configured
to provide redirection to virtual desktops.
Click Add Host.
When you are finished, click Done.
Source: http://technet.microsoft.com/en-us/library/ee216772.aspx

NEW QUESTION: 4
A local university has decided to expand their research capabilities and build a new research facility. You have been hired to design and install the new network in this building. The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
A. security
B. resiliency
C. encryption
D. scalability
Answer: A

Exam

Check when you can schedule the exam. Most people overlook this and assume that they can take the exam anytime but it’s not case.